Raw Linseed Oil – Liberon

Description

The original oil polish with a tradition going back many centuries, Raw Linseed Oil is a hard wearing oil giving a mellow, patinated finish. It is ideal for oiling cricket bats and can be added to other oils to make unique blends

Preparation 

Ensure the surface to be treated is clean and dry. Any previous finish must be thoroughly removed before using Raw Linseed Oil

Application 

Ready to use. For ease of application dilute the first few coats with Liberon Pure Turpentine (up to 30%), or alternatively heat the Raw Linseed Oil by placing it in a container and standing it in a bowl of hot water that can be frequently renewed. If heating the Raw Linseed Oil, DO NOT dilute with turpentine. Rub well into the wood using a lint-free cotton cloth. After about 20-30 minutes, wipe off the excess with a clean lint-free cloth. Failure to do so will prevent penetration of future coats and leave a sticky surface. Repeat the previous steps once or twice at a few days interval. Apply a final coat of undiluted Raw Linseed Oil, again wiping off any excess. Allow this final coat to harden for a few days before use. A minimum of three coats is recommended. A light rubbing in between coats with Liberon Ultra Fine Steel Wool (0000) will improve results. If the surface becomes damaged, work in a new coat.

Important

Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.

Cleaning and maintenance 

Wipe surface with a damp cloth and buff dry. Re-oil as and when required, depending upon usage.

Supplied – 500 ml & 1 Litre containers, larger size’s are available on request

Health & Safety – Data Product Sheet available on request

Additional information