Timber – End Sealer


  • For sealing the ends of timber blanks and freshly cut logs
  • Easy and ready to use straight from the bottle
  • Easily applied using a brush or simply dipping
  • Available in resalable containers of 1 and 5 litre containers
Out of stock

Out of stock

SKU: ES01 Category:


The Chestnut Products End Seal is an emulsified paraffin wax used the seal the ends of freshly cut timber to slow down the drying process and reduce the risk of the timber splitting.

It can also be used on work-in-progress that is being left unfinished where there is a risk of the timber splitting.

Apply it liberally, normally by brush but it can be sprayed if needed, usually to the smallest surface of the timber which will normally be the end grain where moisture is most likely to escape from. Sealing the surface will encourage the moisture to escape via the larger areas which will result in a slower exit.

Supplied in easy to use containers of 1 and 5 litres


Typical uses – To seal wet wood to prevent splitting

Method of application – Brush or dip

Drying time – Up to one hour depending on thickness of coating

Coverage – 4-6 sqr m per litre

Tips – Apply liberally

Thinners – Can be thinned down using normal tap water

Note – Due to postal restrictions and the contents used to make this product, this item is only available for delivery to a UK address


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.