CA-UK adhesives are high quality and specification products developed to bond a wide range of materials and available in a range of viscosities to suit specific purposes.
The Thin Cyanoacrylate glue is ideal where there is a fine line to be bonded, due to the thinness, viscosity and the capillary action of this glue, it will run freely ensuring that the surface area to be bonded is completely covered. This glue is ideal when repairing or securing loose bark on the natural edge of a bowl etc being turned on the lathe and other similar projects.
Ideal for filling between fine cracks / splits in the timber and securing the natural bark to the rim of a natural edge bowl being turned
Bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials.
Supplied in a 50g bottle, the screw top nozzle carefully designed for allowing a single drop application. A pin is fitted to the inside of the top cap, this stop the nozzle from getting all blocked up with any over spill of the glue, providing a tight seal ensuring a longer shelf life between applications.
The CA – UK Adhesive is ideal solution for ensuring a secure bond between the brass tube and the inside of the pen blank
Tip. Using a piece of abrasive, rub and scratch the outside of the brass tube then apply the CA-UK ca glue to the outside of the tube, using a twisting motion as you push the tube in to the pen blank
Can also be used to repair any small defects in the blank
Supplied in bottles of 20 g and 50g
The picture also shows a Bolt Action pen made by Dave Martin