Wood Finishing

Bar-Man™ Clamps /  HoneRite Gold /  ToolGuard VCI /  Robert Sorby Sharpening/Honing Kit /  Deluxe Revolving Centre System /  Protractor /  Stainless Steel Rule /  Marking Knife /  Universal Grinding Gauge /  Universal Grinding Gauge /  Beading & Parting /  Bedan Tool /  Extra Heavy Duty Scrapers /  The Woodturners Love Goblet /  Spiralling & Texturing Tools /  Spindlemaster /   /  Chattertool /  Pen Turning 3 Piece Tool Set /  Sawtooth Forstner Bits /  Hermes RB406 J-Flex Abrasives /  Hermes BW/RB General Woodworking Abrasive /  Roughing-Out Gouge /  Ring Tools /  Original Stebcentre /  Steb Drive /  Revolving Stebcentre /  Woodworkers HSS Countersink /  Midi Bar-Man™ Clamps /  4 Piece Clamp Set 4 in 1 /  Clamp N Spread /  Liberon Super Wood Glue /  Clamp N Vise™ /  Sizing Tool /  Universal Pen Mandrel Kit /  Wheel Dressers /  Carpenters’ Pinchers /  Push Stick /  Push Stick /  Set of 3 Cabinet Scrapers /  Hollowmaster /  Rosewood Handled Marking Knife /  Yew Log-Small Table Clock /  Masur Birch Natural Edge Bowl /  Masur Birch Natural Edge Hollow Form /  Segmented Small Bowl /  Table Lamp /  Lace Bobbin Drive /  End Seal /  EZE-LAP Diamond Needle File Set /  Heavy Duty Drill Vice /  Patriot Woodturning Chuck – Special Offer /  Bowl Reversing Jaws /  RSJLN – Long Nose Jaws /  Custom Jaws /  Drive Centre /  Creusen 6” Powerline Grinder-Slow Speed /  Safety Equipment Starter Set /  Chuck Insert /  Chuck Exerts /  Beam Compass Heads /  Glue Gun /  Snug-Plug Cutters – set of 3 /  Carvin’ Jack /  Gorilla Tape /  Honing Guide Mark II /  Gorilla Glue /  Tormek T-7 Water Cooled Sharpening System c/w NVR Switch /  Bevel Setter /  Set of 7 Auger Gimlets /  Carpenter’s Gauge /  Rule Magnifier /  Sliding Bevel /  Heavy Duty Elasticated Braces /  Gorilla Glue & Gorilla Tape Offer /  Flexcut™ SK108 – 20 Piece and 4 Piece Carving Sets /  Chair Doctor™ Pro /  Arbortech Fully Assembled Mini-Carver Power Tool /  Flexishaft MICROMOT 110/P /  Proxxon 110/P Flexi-Shaft /  Proxxon Motorised Caver MOS. 28 644 /  Veritas Dovetail Saw and Guide /  Magnetic Corner Chisel /  4-Way Speed Frame Clamp with Extension Rods /  The Woodturners Love Goblet / 2 /  Cyanoacrylate Super Glue /  Accelerator for Cyanoacrylate Superglue /  De-Bonder for Cyanoacrylate Superglue /  Centre Steady /  VERITAS® Beam Compass /  Pen Blank Centering Drilling Vise /  Pen Blank Central Drilling Vise /  Multi-Tip Hollowing Tool – RS200KT /  Abrasive Belt / Disc Cleaner /  Abrasive Belt / Disc Cleaner /  Veritas® Ruler Stop /  Restore Rust Remover /  HoneRite #1 /  ProtecTool - Wax /  GreaseXtra /  Restore Pre-Clean /  Shield Technology Restore Special Offer /  MetalGuard ULTRA /  Liberon Rust Remover /  Wobble Chuck /  Flexcut- KN100 Knife Set /  Micro Sandmaster /  Colt Twinland Lip & Spur Wood Drill Bit Set /  Gorilla Glue Fast Cure /  Gorilla Glue Fast Cure /  Micro Spindle Set /  Four-Fold Wooden Rule /  Woodturners Tormek Special Offer /  Nobex Framing Cord Clamp /  RSJP-Pin Jaws 1” (25mm) /  Precision Boring System /  Drive Centres /  TCT Hinge Sinkers /  Restore – Blade & Bit Cleaner /  Restore – Blade & Bit Cleaner /  Long Series HSS Tin Coated Drill Bits /  Arbortech Woodcarver PRO-4 Kit /  Nobex Do It Mitre Saw /  Arbortech Industrial TCT Mini Cutter for Mini Carver /  Arbortech Industrial Carver /  Chestnut Products Buffing Kit /  Easybeader /  Microplane Rotary Shaper /  Microplane Rotary Shaper /  Long Grind Jig /  Tool Tip Holder /  Tool Tip Holder /  Colt MaxiCut Woodturning – Drilling / Boring Set /  Gorilla Super Glue /  Cabinet Makers Screwdriver Set /  Veritas Carver's Vice /  Creative Pen Turning HD – DVD /  Restore Rust Remover Gel /  Proxxon MOS Carver & Flexcut RG100 Power Carving Deluxe Set (14 Piece) Package /  MD2G Moisture Meter /  Jet AFS-500 Air Filtration System /  Jet DC1100A Extractor /  Nobex Proman Mitre Saw /  Multi – Chuck Drive Centres /  Pen Jaws /  Multi-Pack – Abrasive Rolls /  Pen Mandrel Support /  Reduced Shank Drill Bits /  Axminster Evolution Live Revolving Centre /  Flexcut KN250 Deluxe Knife Set /  Banksia Nut /  Burnishing Cream /  Finial Support Mandrel Kit /  Finial Support Mandrel Kit /  Veritas Tapered Snug Plug Cutter & Flush Cutting Saw - PACKAGE DEAL /  Wooden Mallet /  Deluxe Revolving Centre System /  Jet JWBS-14Q Bandsaw /  Pulling Saws /  Vernier Depth Gauge /  Alternative Ivory, Horn & Tortoise Shell /  Boa Constrictor /  No.1 Odd Jobs Tool /  NOVA 10-in-1 Chuck Gauge Accessory /  Classic Woodcarver’s Vice /  CA – UK: Cyanoacrylate Glues /  CA – UK: Cyanoacrylate Glues /  Self – Centering Hinge Drill Bit /  Accessories /  URKO Clamping Systems / 



Application-Tools & Materials

NAME:Cotton Rags 100% Pure Cotton

The Liberon Cotton Rags are 100 percent Pure Cotton. Use to make French polishing rubbers and as lint-free cloths for wiping away excess dyes or buffing wax polishes.   These rags are ideal for applying waxes and polishes to work on the woodturning lathe and being lint-free you able to achieve an excellent finish. Use also to apply and then remove any excess finishing oils to your turned work with the knowledge knowing that you will not scratch or marked your finished work. This product is supplied in 500g sealed bags ensuring that the enclosed cotton rags are clean on arrival



Code Size Description Price
015045 500g Cotton Rags £8.85
015046 1Kg Cotton Rags £16.25


NAME:Woodturners Safety Cloth

The Liberon Woodturners Safety Cloth as been designed especially for the woodturner, you simply use these cloths as you would a normal cotton rag. This safety cloth will tear and brake off if by accident you were to catch the cloth in the fast rotating piece of timber at the lathe, instead of you seriously hurting yourself all you will have done is tear the safety cloth and not your fingers. This is an ideal simple yet effected piece of safety equipment for use at the lathe. Used in the same way as the cotton rags for applying and buffing friction polishes and waxes on the lathe. Supplied in either a pack of 3 or a pack of 10.



Code Size Description Price
015049 3 pk Woodturners Safety Cloth £2.79
015050 10 pk Woodturners Safety Cloth £4.69


NAME:Cotton Waste

The Liberon Cotton waste is made from pure cotton strands for use as wadding inside French polishing rubbers
•     Allows polish to flow evenly from the rubber
•     Easy to shape and mould to size



Code Size Description Price
015043 250g Cotton Waste-250g £5.05
015044 1Kg Cotton Waste-1Kg £12.35


NAME:Dust Grab (Tack Cloth)

Liberon Dust Grab better known as the Tack Cloth is ideal for removing heavy dust from surfaces in the home, car or workshop. Impregnated with a unique blend of resins dust readily adheres to the tacky face of the cloth, however it does not leave a sticky residue on the surface. Dust Grab is long lasting and can be used and re-used many times over.

In the workshop the Liberon Dust Grab can be used to remove dust and lint from wooden surfaces after sanding and prior to staining, waxing or French polishing. It is also ideally suited for removing any dust from turned work at the lathe after the final sanding and prior to applying your chosen finish

•     Long lasting
•     Silicone free
•     Supplied in packs of 3 and 10



Code Size Description Price
015051 Pack of 3 Dust Grab (Tack Cloth) - Pack of 3 £2.95
015052 Pack of 10 Dust Grab (Tack Cloth) - Pack of 10 £7.80


NAME:Vinyl Disposable Gloves

The Chestnut Products Vinyl Disposable Gloves, a lot stronger than the latex type disposable gloves and are designed to protect hands from wood dust and strong colours in water based wood dyes and pigments. They are extremely thin in design so you can feel and control your work properly and are lightly powdered inside for maximum comfort.

The vinyl disposable gloves can be used with most products but some solvents may cause the material to deteriorate. Suitable to be worn on either hand and are large in size. The disposable gloves are supplied in packs of 10

Tip: We strongly recommend that the vinyl disposable gloves are not worn while working at the lathe



Code Size Description Price
015058 Pack of 10 Vinyl Disposable Gloves – Pack of 10 £1.75
015057 Pack of 20 Vinyl Disposable Gloves – Pack of 20 £3.25


NAME:Dust Mask

This is a type: FFP3 Disposable half face mask fitted with an exhalation valve, suitable for dry particle filtration. Can be purchased in a box of 12 or individually



Code Size Description Price
CX1730/1 FFP3 Disposable Dust Mask x 1 £2.95
CX1730/12 FFP3 Disposable Dust Mask box of 12 £30.25


NAME:Stockinette Roll

These large rolls of clean Stockinette can be cut to length as required, which is a good economical format, the Stockinette roll can be used for many different applications, such as; applying stains, waxes and other tasks such as cleaning



Code Size Description Price
STKR/8 800g Stockinette Roll £5.95
STKR/4 400g Stockinette Roll £3.50


NAME:Plastic Scraper

Use the Liberon Plastic Scrapers for stripping paints and varnishes without the risk of scoring the surface of the wood
•     Made from hard wearing plastic
•     Softer and more flexible than metal scrapers
•     Supplied as a set of 2,1 x 50mm & 1 x 75mm



Code Size Description Price
015042 Set of 2 Plastic Scraper Set of 2 £2.20


NAME:Dome Brush for Drills

This bristle brush as been specially designed for polishing waxes and to give a higher gloss and harder coating than buffing with a cloth. The Dome Brush is supplied ready for use and will fit any electric drill and can also be fitted to the lathe using a set of Jacobs’s jaws or similar jaws fitted in the head stock of the lathe. This is a multi-purpose brush, approximately 6 ½” (170mm) in diameter with an 8mm Hex Shank Arbor. The bristles are arranged in a dome shape. This Dome Brush is also ideal for polishing the inside of bowls on the lathe.



Code Size Description Price
DBFD 6 ˝” (170mm) Dome Brush for Drills £25.25


NAME:Drum Brush for Drills

The Chestnut Product Drum Brush for Drills is approximately 200mm in diameter and 100mm long, the bristles are set in a strong sturdy plastic body around an 8mm arbor. These bristle brushes are specially designed for polishing waxes and gives a higher gloss and harder coating than buffing with a cloth. The Drum Brush for Drills is supplied ready for use and will fit any standard electric drill

This Drum Brush is suitable for polishing large flat areas such as panelled doors, table tops, shelves and other similar projects.

Tip: Ensure that the drill is not in reverse or hammer mode. Use along the grain on pine furniture to achieve a fast high gloss finish



Code Size Description Price
DRBFD 200 x 100mm Drum Brush for Drills £23.95


NAME:Foam Brushes

Put an end to brush marks and rogue bristles with these hardwearing and hardworking wooden handled foam brushes, part of the extensive range of high quality finishing products by Chestnut Products. These foam brushes are ideal for the application of many types of polishes, lacquers and paints reduce the foaming action of Acrylic finishes giving a first class finish. Washable and reusable

Supplied in the following pack sizes:
Starter pack consisting of the following:
A pack of 4 Foam Brushes: - 1 x 25mm – 1 x 50mm – 1 x 75mm & 1 x 100mm
Pack of 5 x 25mm – Pack of 4 x 50mm – Pack of 3 x 75mm – Pack of 2 x 100mm



Code Size Description Price
CFB/4 Pack of 4 Foam Brushes - Starter Pack £3.07
CFB/25 25mm Foam Brushes – Pack of 5 x 25mm £3.07
CFB/50 50mm Foam Brushes – Pack of 4 x 50mm £2.55
CFB/75 75mm Foam Brushes – Pack of 3 x 75mm £2.55
CFB/100 100mm Foam Brushes – Pack of 2 x 100mm £2.04


NAME:Nitrile Palm Coated Glove

Manufactured in nitrile foam on the outside and a nylon lining that gives the gloves toughness and the capacity to recover after being stretched: Mechanical requirements: ABCD (3 1 2 1) One size. Ideal for use when applying the different types of wood stains and dyes to your work and also comfortable to be worn when using paints and other types of finishing products in the workshop, office and around the home



Code Size Description Price
NP1 One Size Nitrile Palm Coated Glove £2.05



 

YOUR ACCOUNT





SPECIAL OFFERS

On Offer Today:

Pen Making Kit Special Offer





PRODUCT SEARCH

Enter Product Search:



COMMENTS

Dealt with David recently, truly magnificent service and a true gentle man.
- Ian Hall