Workshop Safety: Clothing & Equipment

Bar-Man™ Clamps /  HoneRite Gold /  ToolGuard VCI /  Robert Sorby Sharpening/Honing Kit /  Deluxe Revolving Centre System /  Protractor /  Stainless Steel Rule /  Marking Knife /  Universal Grinding Gauge /  Universal Grinding Gauge /  Beading & Parting /  Bedan Tool /  Extra Heavy Duty Scrapers /  The Woodturners Love Goblet /  Spiralling & Texturing Tools /  Spindlemaster /   /  Chattertool /  Pen Turning 3 Piece Tool Set /  Sawtooth Forstner Bits /  Hermes RB406 J-Flex Abrasives /  Hermes BW/RB General Woodworking Abrasive /  Roughing-Out Gouge /  Ring Tools /  Original Stebcentre /  Steb Drive /  Revolving Stebcentre /  Woodworkers HSS Countersink /  Midi Bar-Man™ Clamps /  4 Piece Clamp Set 4 in 1 /  Clamp N Spread /  Liberon Super Wood Glue /  Clamp N Vise™ /  Sizing Tool /  Universal Pen Mandrel Kit /  Wheel Dressers /  Carpenters’ Pinchers /  Push Stick /  Push Stick /  Set of 3 Cabinet Scrapers /  Hollowmaster /  Rosewood Handled Marking Knife /  Yew Log-Small Table Clock /  Masur Birch Natural Edge Bowl /  Masur Birch Natural Edge Hollow Form /  Segmented Small Bowl /  Table Lamp /  Lace Bobbin Drive /  End Seal /  EZE-LAP Diamond Needle File Set /  Heavy Duty Drill Vice /  Patriot Woodturning Chuck – Special Offer /  Bowl Reversing Jaws /  RSJLN – Long Nose Jaws /  Custom Jaws /  Drive Centre /  Creusen 6” Powerline Grinder-Slow Speed /  Safety Equipment Starter Set /  Chuck Insert /  Chuck Exerts /  Beam Compass Heads /  Glue Gun /  Snug-Plug Cutters – set of 3 /  Carvin’ Jack /  Gorilla Tape /  Honing Guide Mark II /  Gorilla Glue /  Tormek T-7 Water Cooled Sharpening System c/w NVR Switch /  Bevel Setter /  Set of 7 Auger Gimlets /  Carpenter’s Gauge /  Rule Magnifier /  Sliding Bevel /  Heavy Duty Elasticated Braces /  Gorilla Glue & Gorilla Tape Offer /  Flexcut™ SK108 – 20 Piece and 4 Piece Carving Sets /  Chair Doctor™ Pro /  Arbortech Fully Assembled Mini-Carver Power Tool /  Flexishaft MICROMOT 110/P /  Proxxon 110/P Flexi-Shaft /  Proxxon Motorised Caver MOS. 28 644 /  Veritas Dovetail Saw and Guide /  Magnetic Corner Chisel /  4-Way Speed Frame Clamp with Extension Rods /  The Woodturners Love Goblet / 2 /  Cyanoacrylate Super Glue /  Accelerator for Cyanoacrylate Superglue /  De-Bonder for Cyanoacrylate Superglue /  Centre Steady /  VERITAS® Beam Compass /  Pen Blank Centering Drilling Vise /  Pen Blank Central Drilling Vise /  Multi-Tip Hollowing Tool – RS200KT /  Abrasive Belt / Disc Cleaner /  Abrasive Belt / Disc Cleaner /  Veritas® Ruler Stop /  Restore Rust Remover /  HoneRite #1 /  ProtecTool - Wax /  GreaseXtra /  Restore Pre-Clean /  Shield Technology Restore Special Offer /  MetalGuard ULTRA /  Liberon Rust Remover /  Wobble Chuck /  Flexcut- KN100 Knife Set /  Micro Sandmaster /  Colt Twinland Lip & Spur Wood Drill Bit Set /  Gorilla Glue Fast Cure /  Gorilla Glue Fast Cure /  Micro Spindle Set /  Four-Fold Wooden Rule /  Woodturners Tormek Special Offer /  Nobex Framing Cord Clamp /  RSJP-Pin Jaws 1” (25mm) /  Precision Boring System /  Drive Centres /  TCT Hinge Sinkers /  Restore – Blade & Bit Cleaner /  Restore – Blade & Bit Cleaner /  Long Series HSS Tin Coated Drill Bits /  Arbortech Woodcarver PRO-4 Kit /  Nobex Do It Mitre Saw /  Arbortech Industrial TCT Mini Cutter for Mini Carver /  Arbortech Industrial Carver /  Chestnut Products Buffing Kit /  Easybeader /  Microplane Rotary Shaper /  Microplane Rotary Shaper /  Long Grind Jig /  Tool Tip Holder /  Tool Tip Holder /  Colt MaxiCut Woodturning – Drilling / Boring Set /  Gorilla Super Glue /  Cabinet Makers Screwdriver Set /  Veritas Carver's Vice /  Creative Pen Turning HD – DVD /  Restore Rust Remover Gel /  Proxxon MOS Carver & Flexcut RG100 Power Carving Deluxe Set (14 Piece) Package /  MD2G Moisture Meter /  Jet AFS-500 Air Filtration System /  Jet DC1100A Extractor /  Nobex Proman Mitre Saw /  Multi – Chuck Drive Centres /  Pen Jaws /  Multi-Pack – Abrasive Rolls /  Pen Mandrel Support /  Reduced Shank Drill Bits /  Axminster Evolution Live Revolving Centre /  Flexcut KN250 Deluxe Knife Set /  Banksia Nut /  Burnishing Cream /  Finial Support Mandrel Kit /  Finial Support Mandrel Kit /  Veritas Tapered Snug Plug Cutter & Flush Cutting Saw - PACKAGE DEAL /  Wooden Mallet /  Deluxe Revolving Centre System /  Jet JWBS-14Q Bandsaw /  Pulling Saws /  Vernier Depth Gauge /  Alternative Ivory, Horn & Tortoise Shell /  Boa Constrictor /  No.1 Odd Jobs Tool /  NOVA 10-in-1 Chuck Gauge Accessory /  Classic Woodcarver’s Vice /  CA – UK: Cyanoacrylate Glues /  CA – UK: Cyanoacrylate Glues /  Self – Centering Hinge Drill Bit /  Accessories /  URKO Clamping Systems / 



Breathing Protection

NAME:Dust Mask

This is a type: FFP3 Disposable half face mask fitted with an exhalation valve, suitable for dry particle filtration. Can be purchased in a box of 12 or individually



Code Size Description Price
CX1730/1 FFP3 Disposable Dust Mask £2.95
CX1730/12 FFP3 Disposable Dust Mask box of 12 £30.25


NAME:Planet Mesh Fold Flat Masks FFP2

The Planet Mesh Fold Flat Masks FFP2 has been developed to improve the comfort of disposable respirators whilst maintaining an excellent face fit. Colour coding the range makes identification simple when varying levels of protection may be required.

Blue mesh colour: A – 2V Planetmesh face mask: Approval EN149: 2001 – FFP2. Protection level (xWEL) APF – 10:
Recommended for protection against: Fine toxic dusts dusts/mists: Oil/water based particulates
And can be used as an alternative protection against: Non – toxic dusts & metal fume

The Planetmesh is a vertical fold style disposable respirator with a mesh shell and a preformed nose-bridge, which is completely metal free, this design offers improved comfort and fit with the retention of shape even in extreme conditions. The face masks are individually packed - to prevent contamination and permit convenient storage in your pocket or toolbox

The Planet Mesh Fold Flat Masks FFP2 are ideal for use when turning and sanding timbers such as the spalted beech on the lathe



Code Size Description Price
VFFP2/20 Box of 20 Planet Mesh Fold Flat Masks FFP2 £42.67
VFFP2/01 01 Planet Mesh Fold Flat Masks FFP2 £2.45


NAME:Planetmesh Moulded Mask – FFP3

The Planetmesh has been developed to improve the comfort of disposable respirators whilst maintaining an excellent face fit. Colour coding the range makes identification simple when varying levels of protection may be required.

The picture shows the Planetmesh Moulded Mask – FFP3 outside view and the inside view of the mask



Code Size Description Price
VDP2/5 Box of 5 Planetmesh Moulded Mask – FFP3 £25.30
VDP2/1 01 Planetmesh Moulded Mask – FFP3 £5.25


NAME:The Elipse Half – Face Mask

A major leap in mask design the Elipse Half – Face Mask with an entirely new approach to filter design without compromising on performance

A mask designed to be worn for up to eight hours needs to pay special attention to the ongoing comfort of the wearer. Hence the starting point of an ergonomic design aimed at fitting the contours of the face. Silicon and latex-free, odour-free, non-allergic medical grade materials have been used for the construction of the mask itself as well as for the materials used in the construction of the filters.
The head-strap has four adjustable locations for increased comfort, and a protective head- band at the rear. The compact design further reduces the risk of the mask interfering with the user’s line of vision, or with any eye or ear protection that must also be worn.
A large area non-return exhaust valve has been utilised to provide low breathing resistance which in turn reduces wearer fatigue and the subsequent discomfort experienced by conventional masks. The mask is supplied with P3 filters as standard to provide maximum protection

SPR501 & SPR502:     The Elipse Half Face Mask:

•     Designed to fit the contours of your face
•     Odour – free, non – allergenic, medical grade materials, latex & silicone free
•     Easy 4 – point adjustable light weight head strap
•     Flexible materials to fit the curvature of the face and patented low profile filter design to give maximum field of vision
•     Non – return exhaust valve to reduce risk of wearer fatigue
•     Replacement HESPA air filters are available, which are the only filters designed to work with the Elipse Half Face Mask
100% British Manufactured

The SPR502 Elipse Half Face Mask is the same as the SPR501 Elipse Half Face Mask, except it is supplied and fitted with the P3 (R) Nuisance Odour filters carbon filters, offering added relief against, low levels of nuisance vapours, odours and dust particulates.

HESPA – Filter Media

When development commenced none of the filter media available met the requirements for the new mask. Plenty of high efficiency pleatable media were available, but none combined a sufficiently low pressure loss with the high enough efficiency that was required to produce the low – depth filter needed. Thus, HESPA media – a high efficiency synthetic media with a low pressure loss - was developed to GVS's specification. The HESPA media range has efficiencies from 99.95% to 99.999%, and has been shown to be more robust than the conventional glass media used in respirator filters.

SPR501F:     The Elipse P3 (R) Filters provide protection against dust particles, metal fumes (smoke), asbestos, oil & water mists, vapours, bacteria & viruses.

•     Approved to European Standard EN140: 1998. APF : 20
•     Elipse twin filter ready to wear half mask
•     Latex and silicone free, lightweight TPE face piece that is comfortable to wear for long periods of time
•     Low profile filters provide unobstructed field of vision
•     Compatible with other PPE safety products including visors and welding helmets


SPR336:     The Elipse P3 (R) Nuisance Odour filters have an integrated carbon, offering added relief against, low levels of nuisance vapours, odours and dust particulates.
•     Approved to European Standard EN140: 1998. APF : 20
•     Elipse twin filter ready to wear half mask
•     Latex and silicone free, lightweight TPE face piece that is comfortable to wear for long periods of time
•     Low profile filters provide unobstructed field of vision
•     Compatible with other PPE safety products including visors and welding helmets



Code Size Description Price
SPR501 Medium/Large Elipse Half – Face Mask Was £21.60 – Our Price £18.99 £18.99
SPR501F Pack of 2 Elipse P3 Replacement Filters £7.99
SPR501MF Elipse Half – Face Mask & Replacement Filters – Special Offer: Was £30.60 Our Price £22.99 £22.99
SPR502 Medium/Large Elipse Half – Face Mask – Elipse P3 (R) Nuisance Odour filters. Was £22.80 – Our Price £19.99 £19.99
SPR336 Pack of 2 Elipse P3 Nuisance Odour Carbon Replacement Filters Pack of 2 £8.50
SPR502MF Elipse Half – Face Mask & Elipse P3 Nuisance Odour Replacement Filters – Special Offer: Was £31.30 Our Price £24.99 £24.99


NAME:Elipse P3 (R) and Elipse P3 (R) Nuisance Odour Carbon Replacement Filters

HESPA air filters for the Elipse Safety Half Face Mask
P3 – HESPA – Filter Media when development commenced none of the filter media available met the requirements for the new mask. Plenty of high efficiency pleatable media were available, but none combined a sufficiently low pressure loss with the high enough efficiency that was required to produce the low – depth filter needed. Thus, HESPA media – a high efficiency synthetic media with a low pressure loss - was developed to GVS's specification. The HESPA media range has efficiencies from 99.95% to 99.999%, and has been shown to be more robust than the conventional glass media used in respirator filters.

The HESPA air filter is approved as a particle filter in accordance with European Standard EN1432000/A1. These filters are designed to fit the Elipse Safety Respirator (half face mask) only, which is approved as a half – mask in accordance with European Standard EN140:1998.

SPR501F: The Elipse P3 (R) Filters provide protection against dust particles, metal fumes (smoke), asbestos, oil & water mists, vapours, bacteria & viruses.

•     Approved to European Standard EN140: 1998. APF : 20
•     Elipse twin filter ready to wear half mask
•     Latex and silicone free, lightweight TPE face piece that is comfortable to wear for long periods of time
•     Low profile filters provide unobstructed field of vision
•     Compatible with other PPE safety products including visors and welding helmets

SPR336: The Elipse P3 (R) Nuisance Odour Carbon Filters have an integrated carbon, offering added relief against, low levels of nuisance vapours, odours and dust particulates.
•     Approved to European Standard EN140: 1998. APF : 20
•     Elipse twin filter ready to wear half mask
•     Latex and silicone free, lightweight TPE face piece that is comfortable to wear for long periods of time
•     Low profile filters provide unobstructed field of vision
•     Compatible with other PPE safety products including visors and welding helmets

We recommend that when changing the filters that you change the two filters at the same time. The Elipse P3 and Elipse P3 (R) Nuisance Odour Carbon Replacement Filters are supplied in packs of two



Code Size Description Price
SPR501F Pack of 2 Elipse P3 Replacement Filters £7.99
SPR336 Pack of 2 Elipse P3 Nuisance Odour Carbon Replacement Filters Pack of 2 £8.50



 

YOUR ACCOUNT





SPECIAL OFFERS

On Offer Today:

Safety Equipment Starter Set





PRODUCT SEARCH

Enter Product Search:



COMMENTS

Hi David. Just wanted to say thank you as my parcel came this morning. It was a really fast service and I will definitely point my partner in your direction next time he is buying tools for his business. Thanks again
- Shelley W