(1 customer review)

Crush Grind – Woodcut Mill Drill for Crush Grind Salt & Pepper Mechanisms

£88.96

  • Eases the production of pepper grinders utilising the CrushGrind® mechanism
  • Has a No2 Morse Taper so it will fit into the tailstock of most lathes
  • This means the drilling process can be done on a lathe
  • Can also act as a chuck for 10mm shank drills or forstner bits
Out of stock

Out of stock

 

Description

The Woodcut MillDrill™ was designed to make the production of pepper grinders that utilise the CrushGrind® mechanism, easier and quicker. However, it is a versatile tool and with some adjustment to the cutters it can be used to drill out a variety of different hole sizes

The Woodcut MillDrillâ„¢ incorporates a No2 Morse Taper so it will fit into the tail stock of most lathes; this means the drilling process can be done on a lathe.

The Woodcut MillDrillâ„¢ has been pre-sharpened ready for immediate use but will need to be sharpened again when the cutters become dull or blunt. Depending on the types of wood being used will depend on how often the cutters will require to be sharpened, regular touch-ups can be done with a diamond lap stone. For more information on sharpening see our sharpening section

Additional Information:

The Woodcut MillDrillâ„¢ has the added feature of being able to act as a chuck for drill bits with a 10mm shank. Many forstner bits, for example have reduced shanks that measure 10mm and these can be inserted into the front of the Woodcut MillDrillâ„¢. Before doing so the front cutter needs to be removed and then, with the drill bit inserted in the front hole, the two grub screws can be tightened.

The Woodcut MillDrillâ„¢ comes complete with the cutters fitted an Allen key and instruction sheets showing how to prepare and use the Woodcut MillDrillâ„¢.

The Crush Grind salt and pepper mechanisms are supplied in three sizes which are brought separately, for drilling for the CrushGrind mechanism a 25mm sawtooth cutter or forstner is required to first cut the hole through the centre of the blank

1 review for Crush Grind – Woodcut Mill Drill for Crush Grind Salt & Pepper Mechanisms

  1. David Martin

    Thank you David, this is a well-designed cutting tool making it much easier and faster for drilling out my salt and peeper mills, using the CrushGrind mechanisms. Especially when I have a large order request, and I recommend the wood cut mill to all those who turn their salt and pepper mills using any size of the CrushGrind mechanisms

Only logged in customers who have purchased this product may leave a review.