The Micro – Mesh is a unique type of abrasive used for when you are looking at achieving an extremely high standard of finish, use the micro-mesh pads after finishing with abrasives such as the Hermes RB406 J-Flex abrasives with a grit of 400 or the Mirka Abranet® abrasives 600 grit. Then start to use the micro – mesh abrasive pads starting with a grit of 1,500 this alone will produce an extremely high standard of finish.
If required, you then go on to use higher grit micro – mesh pads and after using the 12000 grit any scratch marks left during the finishing process will not be detectable to the naked eye. This type of abrasive will produce an excellent fine finish every time and apart from its use for work being turned at the lathe, the micro – mesh pads can be used on many different types of projects where a high standard of finish is required. They are also washable making them last much longer than your standard abrasives Supplied in a pack of nine double sided pads each approximately 50 x 50mm with grits ranging from 1,500 to 12,000 grit. An easy to follow colour chart is supplied and is a guide only, to aid you in selecting the micro-mesh abrasive pads.
The Micro-Mesh abrasive pads are the ideal choice for finishing off pens, jewellery and other small projects on the lathe.