Cut’n’Polish

£9.69

  • For the woodturner
  • A mixture of a fine abrasive blended with two waxes
  • Easy to apply
  • Aids in reducing any build-up of dust
  • Hard wearing
  • Can be buffed up to a high sheen
  • Use over the top of friction polish
  • 225 ml container
Out of stock

Out of stock

SKU: CNP225 Categories: , , ,
 

Description

The Chestnut Products Cut’n’Polish is a blend of two waxes with a fine abrasive held in suspension within them. This is a soft wax designed to stay ‘wet’ slightly longer during application, allowing it to lubricate the abrasive to give a very fine cut to the timber and also to collect any dust generated during use and some subsequent sanding, preventing it from entering the workshop atmosphere.

On bare wood; sand to 240 grit as normal, apply a coat of Cut’n’Polish with the lathe stopped, then switch on the lathe and buff to a soft sheen whilst smoothing the timber at the same time.

On sealed wood apply after the sealer in the same way, polishing to a slightly higher shine. Cut’n’Polish dries almost immediately and can be overcoated with Friction Polish or any of our waxes for a higher shine.

Supplied in a 225 ml container

Note – Due to postal restrictions and the contents used to make this product, this item is only available for delivery to a UK address

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.